Product Information
Waveform: Sine wave
Battery pack: 518Wh, (14.8V 35AH)
Rated power: 600W peak 1000W
Battery type: High quality lithium ion battery (universal lithium charge 600 times, no memory effect, about 85% storage capacity after 600 charges)
Replaceable iron-lithium PO4 Lithium Iron 3.2V 4S7P 32.2Ah (Fe-Li 412WH)
Rated power: 600W
Input:
AC: AC 110V-220V 60/50Hz
DC: Adapter 22V/5A (110W), fully charged in about 6.5 hours
Solar: Anderson interface 120W MAX (5A 18-24V)
1TPYE-C:: 20V/5A 100WMAX (double pass), with DC charging, it can be fully charged in about 5 hours
Output:
AC output: 220V 50Hz / 110V 60Hz/50hz (three US/Japanese gauges, two national standard outputs)
Four DC outputs DC: 13.2V/10A(MAX) 132W
2 USB: 5V/2.4A
1 USB-QC3.0: 5V/3A, 9V/2A, 12V/1.5A 18W MAX
1TPYE-C: 20V/5A) (double pass)
Car charger output: 13.2V/5-10A MAX
Lighting lamp: 4W
Charging temperature: 0~40℃ (32~104℉)
Discharge temperature: -10~60℃ (14~140℉)
Storage temperature: -20~45℃ (-4~113℉)
Lifetime: >500 times
Security protection: multiple protection
Productsize: 286X150X158MM
Packing size: 33X22X29CM
Bare metal: 6.6KG
Gross weight: 7.1KG
Input Conversion: 90%
Output conversion: the inverter has a conversion rate of 92%
Danger Warning!!!
Please read the specification carefully before using the battery.
-
It is forbidden to disassemble the battery inside the product
The protection mechanism and protection circuit inside the battery can avoid danger. Improper disassembly and assembly will damage the protection function and cause the battery to heat, smoke, deform or burn.
-
Do not short circuit the battery inside the product
Do not connect the positive and negative electrodes of the battery with metal, do not store and move the battery pack together with the metal sheet. If the battery is short circuited, there will be a large current flow, which will damage the fuse.
-
It is strictly forbidden to heat and burn the battery inside the product
Heating and burning the battery will cause the dissolution of the battery insulator, loss of safety function or electrolyte burning. Overheating will cause the battery to heat, smoke, deform or burn.
-
Avoid using batteries near heat sources
Do not use the battery near the fire source, oven or in the environment over 80℃. Overheating will lead to internal short circuit of the battery, causing the battery to heat, smoke, deform or burn.
-
Do not soak the product to wet the internal battery
Do not wet the battery, and do not put the battery into water. Otherwise, the internal protection circuit and function of the battery will be lost and abnormal chemical reaction will occur. The battery may be heated, smoking, deformed or burned.
-
No live dismantling
When the product is working, there is high voltage inside. It must be shut down before dismantling to ensure that all output interfaces have no voltage.
-
Do not damage the battery
It is forbidden to chisel the battery with metal, hammer or drop the battery or damage the battery by other means, otherwise it will cause the battery to heat, smoke, deform or burn, and even cause danger.
-
Direct welding on the battery body inside the product is prohibited
Overheating will cause the dissolution of the battery insulator and the loss of safety protection function, which will make the battery heat, smoke, deform or burn.
-
Do not touch the leaking battery directly
Leakage of electrolyte will cause skin discomfort. In case of electrolyte entering eyes, rinse with water as soon as possible and send to hospital for treatment.